Pengaruh Arah Irisan dan Tingkat Ketebalan Irisan Jahe terhadap Tingkat Kehalusan Tepung Jahe

Authors

  • Yuliani Afrilia Universitas Lampung
  • Tamrin Tamrin Universitas Lampung
  • Elhamida Rezkia Amien Universitas Lampung
  • Sapto Kuncoro Universitas Lampung

DOI:

https://doi.org/10.23960/jabe.v2i4.8397
Abstract View: 484

Abstract

Ginger has a fairly high fiber content that can affect the flour produced when it goes through the powdering process. The purpose of this research was to determine the effect of the direction and the thickness of ginger slices on the level of flour fineness. The experiment was conducted by using a completely randomized design (CRD) with two factors. The first factor is the direction of the slice with two treatments, namely vertical slice (V) and horizontal slice (H). The second factor was the thickness of the slices with three levels, namely 2 mm (T1), 4 mm (T2), and 6 mm (T3). It treatment combination was carried out in triplicates. The parameters observed were moisture content, repose angle, degree of fineness, uniformity index, grain yield, bulk density, and color. The data obtained were analyzed by using Anova test available in Excel and SAS, if there is significant different among the parameters, then is followed by LSD test at α = 0,05. The results showed that the direction of slices significantly affect the fineness of the flour, in which vertically sliced cuts produced better fineness than that of horizontally sliced cuts. The thickness of cuts did not significantly influence the flour characteristic.

 

Keywords:  Fineness, Ginger, Ginger Fiber, Ginger Flour, Slice Direction, Thickness of the Slices.

Downloads

Download data is not yet available.

References

Arizka, A. A. dan Daryatmo, J. 2015. Perubahan Kelembaban dan Kadar Air Teh Selama Penyimpanan pada Suhu dan Kemasan yang Berbeda. Jurnal Aplikasi Teknologi Pangan 4(4). 124-129.

Evizal, Rusdi. 2013. Tanaman Rempah dan Fitofarmaka. Lembaga Penelitian Universitas Lampung. Bandar Lampung.

Hambali, E., Fatmawati, dan Permanik, R. 2005. Membuat Bumbu Instan Kering. Penebar Swadaya. Jakarta.

Kartasapoetra, G. 1996. Budidaya Tanaman Berkhasiat Obat. Rineka Cipta. Jakarta.

Kharisma, N., Waluyo, S., dan Tamrin. 2014. Pengaruh Perbedaan Kecepatan Putar (RPM) Disc Mill Terhadap Keseragaman Ukuran Butiran Gula Semut. Jurnal Teknik Pertanian Lampung 3(3). 223-232.

Retnani, Y., Wigati, D., dan Hasjmy, A. D. 2009. Pengaruh Jenis Kemasan dan Lama Penyimpanan terhadap Serangan Serangga dan Sifat Fisik Ransum Broiler Starter Berbentuk Crumble. Jurnal Ilmiah Ilmu-Ilmu Peternakan 12(3). 137-145.

Santoso, H. B. 1989. Jahe. Kanisius.Yogyakarta.

Toharmat, T., E. Nursasih, R. Nazilah, N. Hotimah, T. Q. Noerzihad, N.A. Sigit & Y. Retnani. 2006. Sifat Fisik Pakan Kaya Serat dan Pengaruhnya terhadap Konsumsi dan Kecernaan Nutrien Ransum pada Kambing. Media Peternakan 29(3).146-154.

Yuliani, S. dan Kailaku, S. I. 2009. Pengembangan Produk Jahe Kering dalam Berbagai Jenis Industri. Buletin Teknologi Pascapanen Pertanian 5. 61-68.

Yuwono, S. S.”Kandungan Kimia Jahe”. http://darsatop.lecture.ub.ac.id/2015/04/kandungan-kimia-jahe/ (diakses pada 4 Januari 2020).

Downloads

Published

2023-12-22

How to Cite

Afrilia, Y., Tamrin, T., Amien, E. R., & Kuncoro, S. (2023). Pengaruh Arah Irisan dan Tingkat Ketebalan Irisan Jahe terhadap Tingkat Kehalusan Tepung Jahe. Jurnal Agricultural Biosystem Engineering, 2(4), 524–531. https://doi.org/10.23960/jabe.v2i4.8397

Issue

Vol. 2 No. 4 (2023): December 2023

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Jurnal Agricultural Biosystem Engineering

Creative Commons License
JABE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.