Analisis Resiko Ergonomi Pengolahan Tanah Menggunakan Traktor Tangan dengan Nordic Body Map (NBM)
DOI:
https://doi.org/10.23960/jabe.v4i2.11107
Abstract
Continuous tillage using hand tractors requires high physical strength and involves non-ergonomic body postures. Work involving heavy physical activity, especially with improper working postures can cause musculoskeletal injuries or musculoskeletal disorders/ MSDs). This study aims to identify the level of musculoskeletal disorders (MSDs) of hand tractor operators in tillage using the Nordic Body Map (NBM) method. The study was conducted in Banjar Agung Village, East Lampung, involving operators aged 30–40 years and operators aged 40–50 years. Data were obtained through interviews to fill out the NBM questionnaire. The results of the NBM analysis showed that tillage activities using two-wheeled tractors by operators aged 30–40 years did not require immediate treatment with a Likert scale of 1 (light risk level) and that by operators aged 40–50 years required immediate treatment with a Likert scale of 2 (high risk level).
Keywords: Hand Tractor, Nordic Body Map (NBM), Musculoskeletal Disorders (Msds), Soil Tillage.
Downloads
References
Afma, V. M., & Widodo, B. W. (2020). Perancangan Alat Bantu Pengulitan Kambing Menggunakan Metode Reba (Rapid Entire Body Assessment) untuk Mengurangi MSDs. PROFISIENSI: Jurnal Program Studi Teknik Industri, 8(1), Article 1. https://doi.org/10.33373/profis.v8i1.2482
Hamdy, M. I., & Syamzalisman. (2018). Analisa Postur Kerja dan Perancangan Fasilitas Penjemuran Kerupuk yang Ergonomis Menggunakan Metode Analisis Rapid Entire Body Assessmet (Reba) dan Antropometri. Jurnal Sains, Teknologi Dan Industri, 16(1), 57–65.
Jacobs, C. O. (1983). Agricultural Power and Machinery. Glencoe/McGraw-Hill School Pub.
Javandira, C., Raka, I. D. N., & Gama, A. W. S. (2019). Pengenalan dan Demonstrasi Penggunaan Traktor pada Krama Subak Desa Adat Anggabaya. WIDYABHAKTI Jurnal Ilmiah Populer, 1(2), Article 2. https://doi.org/10.30864/widyabhakti.v1i2.42
Kroemer, K. H. E., Kroemer, H. B., & Kroemer-Elbert, K. E. (1994). Ergonomics: How to Design for Ease and Efficiency. Prentice Hall.
Prabawa, S. (2009). Analisis Kebisingan Dan Getaran Mekanis Pada Traktor Tangan. Agritech, 29(2), 103–107.
Restuputri, D. P., Lukman, M., & Wibisono. (2017). Metode REBA Untuk Pencegahan Musculoskeletal Disorder Tenaga Kerja. Jurnal Teknik Industri, 18(1), 19–28.
Santoso, S., Yasra, R., & Purbasari, A. (2014). Perancangan Metode Kerja untuk Mengurangi Kelelahan Kerja pada Aktivitas Mesin Bor di Workshop Bubut PT. Cahaya Samudra Shipyard. PROFISIENSI: Jurnal Program Studi Teknik Industri, 2(2), Article 2.
Setiawan, A. (2021). Pembuatan Mesin Traktor Tangan Kerangka Pipa Dengan Gasoline Engine 5.5 Hp Skala Kebun. Jurnal Teknik Mesin, 7(1), Article 1.
Sulnawati, E., Abdullah, S. H., & Priyati, A. (2016). Analisis Teknis dan Kajian Ergonomika berdasarkan Antropometri pada Penggunaan Traktor Tangan untuk Lahan Sawah (Anthropometry based Technical Analysis and Ergonomic Studies on Utilization of Hand Tractor for Farm Field: Anthropometry based Technical Analysis and Ergonomic Studies on Utilization of Hand Tractor for Farm Field. Jurnal Ilmiah Rekayasa Pertanian dan Biosistem, 4(2), 239–247.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Agricultural Biosystem Engineering
JABE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.