Uji Kinerja Mesin Pencacah Tipe GX 160 untuk Pencacahan Tongkol jagung dan Ampas Tebu

Authors

  • Muhammad Pijar Department of Agricultural Engineering, Faculty of Agriculture, Lampung University
  • Siti Suharyatun Department of Agricultural Engineering, Faculty of Agriculture, Lampung University
  • Mareli Telaumbanua Department of Agricultural Engineering, Faculty of Agriculture, Lampung University
  • Agus Haryanto Department of Agricultural Engineering, Faculty of Agriculture, Lampung University

DOI:

https://doi.org/10.23960/jurnal%20abe.v1i1.5796
Abstract View: 295

Abstract

Agricultural waste is widely used as feed or a mixture of feed for livestock. Before use, agricultural waste must be chopped so that livestock can easily eat it. One of the agricultural waste chopping machines is a multipurpose type chopper. The aim of the research was to test the performance of a multipurpose chopper machine for chopping corn cobs and bagasse. This study used a completely randomized factorial design, consisting of 2 factors, namely material (corncob and sugarcane bagasse) and and the rotational speed (RPM) which consists of 600, 800, 1000 and 1360. Each treatment combination was repeated 3 times. Parameters observed were working capacity, weight loss, fuel consumption, specific fuel consumption, and fineness modulus. The results of this study indicate that the work capacity of the bagasse higher than corncob. Working capacity at speeds of 600 RPM to 1000 RPM will increase with increasing speed. Materials and RPM not effect to material loss. fuel consumption and specific fuel consumption of bagasse (0,859 lt/h; 0,074 lt/kg) are higher than corn cobs (0,754 lt/h; 0,170 lt/kg. Fineness modulus of corn cobs is 2.504% and sugarcane bagasse is 2.373%.

Downloads

Download data is not yet available.

References

Anisa, S., Suharyatun, S., Oktafri, O., & Asmara, S. (2018). UNJUK KERJA MESIN PEMOTONG PADI (PADDY MOWER) SAAT PEMANENAN PADI (Oryza sativa L.) DI LAHAN BASAH. JurnSal Teknik Pertanian Lampung, 7(2), 97–105.

Fadli, I., & Lanya, B. (2015). Pengujian Mesin Pencacah Hijauan Pakan ( Chopper ) Tipe Vertikal Wonosari I Test Performance of Forage Chopper Vertikal Wonosari Type I. 4(1), 35–40.

Hidayat, M., & Gunanto, A. (2006). Evaluasi kinerja teknis mesin pencacah hijauan pakan ternak ( Performance evaluation of paddy straw chopper machinery ). Enjiniring Pertanian, IV(2).

Indraningsih, R. W., & Sani, Y. (2012). Limbah pertanian dan perkebunan sebagai pakan ternak: kendala dan prospeknya. Lokakarya Nasional IPTEK Dalam Pengendalian Penyakit, Strategi Pada Ternak Ruminansia. Bogor.

Josua, E., Oppusunggu, K., & Supriadi, S. (2018). Uji kinerja mesin pencacah ubi model rotary untuk bahan baku pakan ternak kapasitas 100 kg/jam. Mekanik, 4(1), 329169.

Julianto E. dan Suryanto. (2020). Analisis pengaruh putaran mesin pada efisiensi bahan bakar mesin diesel 2DG-FTV. Jurnal Penelitian dan Pengabdian Kepada Masyarakat UNSIQ, Vol. 7 No. 3, 225 - 231

Kharisma, N., Waluyo, S., & Tamrin. (2014). Pengaruh perbedaan kecepatan putar (RPM) Discmill terhadap keseragaman ukuran butiran gula semut. Jurnal Teknik Pertanian Lampung, 3(3), 223–232.

Mulyono, T. (2004). Teknologi beton (1 ed).

Prastya, O. A., Utama, I. M. S., & Yulianti, N. L. (2015). Pengaruh pelapisan emulsi minyak wijen dan minyak sereh terhadap mutu dan masa simpan buah tomat (Lycopersicon esculentum Mill). Jurnal BETA (Biosistem Dan Teknik Pertanian), 3(1).

Downloads

Published

2022-06-07

How to Cite

Pijar, M., Suharyatun, S., Telaumbanua, M., & Haryanto, A. (2022). Uji Kinerja Mesin Pencacah Tipe GX 160 untuk Pencacahan Tongkol jagung dan Ampas Tebu. Jurnal Agricultural Biosystem Engineering, 1(1). https://doi.org/10.23960/jurnal abe.v1i1.5796

Issue

Vol. 1 No. 1 (2022): Maret 2022

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Jurnal Agricultural Biosystem Engineering

Creative Commons License
JABE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.