Pengaruh Kadar Air Gabah Terhadap Kinerja Penggilingan Padi

  • Siti Asfiatul Mukaromah
    Department of Agricultural Engineering, Faculty of Agriculture, Lampung University
  • Agus Haryanto
    Department of Agricultural Engineering, Faculty of Agriculture, Lampung University
  • Siti Suharyatun
    Department of Agricultural Engineering, Faculty of Agriculture, Lampung University
  • Tamrin Tamrin
    Department of Agricultural Engineering, Faculty of Agriculture, Lampung University
DOI: https://doi.org/10.23960/jurnal%20abe.v1i1.5993
Abstract Views (Last 12 Months)
2430 Abstract Views
3616 Downloads

Abstract

The moisture content of raw rice grains is an important factor that determines the quality of rice produced from milling. This study aimed to determine the effect of rice grain moisture content on rice milling performance which includes yield, degree of whiteness of rice, and proportion of head rice, broken rice, and groat rice. This research consisted of two stages, namely collecting data and samples at the rice mill and testing the quality of white rice. This study used 50 samples of raw rice grain and white rice produced from rice mills in Pring Sewu. The results showed that RMU worked well and produced a rice yield of 63.12%. The results also concluded that raw grain moisture content does not affect the quality of rice. White rice produced from milling had a whiteness index of 63.87 with the proportion of head rice of 73.59%, broken rice of 14.91%, and rice bran of 4.87%.

Downloads

Download data is not yet available.

References

Abraham, A., Mathew, A.K., Sindhu, R., Pandey, A. & Binod, P. 2016. Potential of rice straw for bio-refining: An overview. Bioresource Technology, 215: 29–36.

Afzalinia, S., Shaker, M. & Zare, E. 2004. Comparison of different rice milling methods. Canadian Biosystems Engineering, 46(3): 3.63-3.66.

Alsharifi, S.K.A., Arabhosseini, A., Kianmehr, M.H. & Kermani, A.M. 2017. Effect of Moisture Content, Clearance and Machine Type on Some Qualitative Characteristics of Rice (Tarm Hashemi) Cultivar. Bulgarian Journal of Agricultural Science, 23(2): 348–355.

Amalia, R.R., Prasetyo, O.R., Hartini, M., Poerwaningsih, R., Lestari, N.G.P.A.S., Gunawan, R., Syadzwina, M.A., Aziz, M.F., Kosasih, A., Iftitah, H.S., Setiawan, T., Sari, D.M. & Firmansyah, D.R. 2020. Konversi Gabah Ke Beras Tahun 2018. Jakarta: Badan Pusat Statistik.

Badan Standarisasi Nasional. 2015. SNI Beras. Jakarta: BSNI.

Bagus. 2016. Pengaruh Kadar Air Gabah dan Kelembaban Simpan Terhadap Perubahan Mutu Fisik Beras Giling. Palembang: Sriwijaya.

Bond, N. 2004. Rice Milling. In Rice: Chemistry and Technology. Minnesota, U.S.A.: American Association of Cereal Chemists, Inc.: 283–300.

BPS. 2022a. Luas Panen, Produksi, dan Produktivitas Padi Menurut Provinsi 2019-2021. https://www.bps.go.id. https://www.bps.go.id/indicator/53/1498/1/luas-panen-produksi-dan-produktivitas-padi-menurut-provinsi.html.

BPS. 2022b. Rata-Rata Konsumsi per Kapita Seminggu Beberapa Macam Bahan Makanan Penting, 2007-2021. https://www.bps.go.id. https://www.bps.go.id/statictable/2014/09/08/950/rata-rata-konsumsi-per-kapita-seminggu-beberapa-macam-bahan-makanan-penting-2007-2021.html.

CFAMA, (Centre de Formation Et d’Application du Machinisme Agricole). 2013. Analysis of Paddy Grain and Rice Quality in Madagascar. Antsirabe: Japan International Cooperation Agency (JICA).

Collier, W.A., Colter, J., Sinarhadi & Shaw, R. d’A. 1974. Choice of Technique in Rice Milling on Java. Bulletin of Indonesian Economic Studies, 10(1): 106–120.

Haryanto, A., Adi, S.P., Suharyatun, S., Wisnu, F.K. & Telaumbanu, M. 2022. Performance and Prospects of Mobile Rice Mill Unit. International Journal on Advanced Science, Engineering and Information Technology (IJASEIT), Accepted.

Hassan, Z.H. 2014. Kajian Rendemen dan Mutu Giling Beras di Kabupaten Kotabaru Provinsi Kalimantan Selatan. Pangan, 23(3): 232–242.

Hung, N.V., Tuan, T.V., Meas, P., Tado, C.J.M., Kyaw, M.A. & Gummert, M. 2019. Best practices for paddy drying: case studies in Vietnam, Cambodia, Philippines, and Myanmar. Plant Production Science, 22(1): 107–118.

Ilieva, V.N.M.R., Markova Ruzdik, N., Vulcheva, D., Mihajlov, Lj. & Ilievski, M. 2019. Effect of harvest time of paddy on milled rice yield and broken kernels. Agricultural Science and Technology, 11(4): 327–331.

Imoudu, P. 2000. The effect of sun-drying on milling yield and quality of rice. Bioresource Technology, 74(3): 267–269.

IRRI. 2020. Milling. http://www.knowledgebank.irri.org/step-by-step-production/postharvest/milling 28 March 2020.

Iswanto, P.H., Akbar, A.R. & Rahmi, A. 2015. Pengaruh Kadar Air Gabah Terhadap Mutu Beras Pada Varietas Padi Lokal Siam Sabah. Jtam Inovasi Agroindustri, 1 No, 1: 12–23.

Kalsum, U., Sabat, E. & Imadudin, P. 2020. Analisa Hasil Rendemen Giling dan Kualitas Beras pada Penggilingan Padi Kecil Keliling. Agrosaintifika : Jurnal Ilmu-Ilmu Pertanian, 2(2): 125–130.

Paul, H., Nath, B.C., Bhuiyan, M.G.K., Paul, S., Islam, S., Huda, M.D. & Shozib, H.B. 2019. Effect of Degree of milling on rice grain quality. Journal of Agricultural Engineering, 42(4): 69–76.

Rachmat, R., Rahayu, E., Hadipernata, M. & Kim, J. 2019. Effective Management System of Rice Processing Industry in Indonesia. IOP Conference Series: Earth and Environmental Science, 309: 012009.

Sahari, Y., Abdul Wahid, R., Mhd Adnan, A.S., Sairi, M., Hosni, H., Engku Abdullah, E.H., Alwi, S., Mohd Amin Tawakkal, M.H., Zainol Abidin, M.Z. & Aris, Z. 2018. Study on the drying performance and milling quality of dried paddy using inclined bed dryers in two different paddy mills located in MADA and IADA KETARA. International Food Research Journal, 26(5): 2572–2578.

Salvatierra-Rojas, A., Nagle, M., Gummert, M., Bruin, T. de & Müller, J. 2017. Development of an inflatable solar dryer for improved postharvest handling of paddy rice in humid climates. International Journal of Agricultural and Biological Engineering, 10(3): 269–282.

Sawit, M.H. 2014. Analisa Hasil Sensus Penggilingan Padi 2012. Jurnal Pangan, 23(3): 208–219.

Shamsuddin, Md. & Bhattacharya, K.R. 2007. On the meaning of the degree of milling of rice. International Journal of Food Science & Technology, 13(2): 99–105.

Sharma, N. & Khanna, R. 2020. Rice Grain Quality: Current Developments and Future Prospects. In F. Shah, Z. Khan, A. Iqbal, M. Turan, & M. Olgun, eds. Recent Advances in Grain Crops Research. IntechOpen. https://www.intechopen.com/books/recent-advances-in-grain-crops-research/rice-grain-quality-current-developments-and-future-prospects 21 September 2021.

Singh, R.K. 2007. An economic analysis of rice milling in Udham Singh Nagar district of Uttaranchal. Dissertation. Jaunpur, India: V. B. S. Purvanchal University. http://shodhganga.inflibnet.ac.in:8080/jspui/handle/10603/169139 31 August 2020.

Soomro, Shakeel Ahmed, Chen, K. & Soomro, Sohail Ahmed. 2020. Mathematical Modelling and Optimisation of Low-Temperature Drying on Quality Aspects of Rough Rice. Journal of Food Quality, 2020: e6501257.

Timmer, C.P. 1973. Choice of Technique in Rice Milling on Java. Bulletin of Indonesian Economic Studies, 9(2): 57–76.

Timmer, C.P. 1974. Choice of Technique in Rice Milling on Java: A Reply. Bulletin of Indonesian Economic Studies, 10(1): 121–126.

Ulfa, R., Hariyadi, P. & Tjahja, M. 2014. Rendemen Giling dan Mutu Beras pada Beberapa Unit Penggiling Padi Kecil Keliling di Kabupaten Banyuwangi. Jurnal Mutu Pangan, 1(1): 26–32.

You, K.Y., You, L.L., Yue, C.S., Mun, H.K. & Lee, C.Y. 2017. Physical and Chemical Characterization of Rice Using Microwave and Laboratory Methods. In Amanullah & S. Fahad, eds. Rice - Technology and Production. InTech. http://www.intechopen.com/books/rice-technology-and-production/physical-and-chemical-characterization-of-rice-using-microwave-and-laboratory-methods 26 May 2021.

Cover
Issue
Published
2022-06-14
How to Cite
Mukaromah, S. A., Haryanto, A., Suharyatun, S., & Tamrin, T. (2022). Pengaruh Kadar Air Gabah Terhadap Kinerja Penggilingan Padi. Jurnal Agricultural Biosystem Engineering, 1(1). https://doi.org/10.23960/jurnal abe.v1i1.5993