Analisis Ergonomika Pengoperasian Bagian Pencacah pada Mesin Pencacah Pakan Ternak Multiguna

Authors

  • Ayu Anggiana Universitas Lampung
  • Siti Suharyatun Universitas Lampung
  • Febryan Kusuma Wisnu Universitas Lampung
  • Warji Warji Universitas Lampung

DOI:

https://doi.org/10.23960/jabe.v2i3.8037
Abstract View: 323

Abstract

The multi-purpose animal feed chopping machine is one of the feed chopping tools that many farmers use to help speed up the chopping of raw materials that will be used as animal feed. The chopping machine can be operated optimally if the machine is ergonomic so that it is safe and comfortable to operate. This study aims to analyze the ergonomics of a multi-purpose animal feed chopper in terms of anthropometry, operating workload and the level of work fatigue specifically for the chopper. This research uses quantitative methods which are supported by literature studies regarding the design of creating machine dimensions. The parameters in this study are: (1) anthropometric data consisting of Standing Finger Tip Height (TJUB), Standing Vertical Reach (JVB), and Standing Horizontal Reach (JHB); (2) the recommended weight limit that can be lifted by the operator (RWL), and (3) cardiovascular load (CVL). The research results stated that the height of the chopper hopper (100 cm) was classified as ergonomic because it was still between TJUB (66.10 cm) and JVB (183.95 cm). The operator's position from the hopper should not exceed JHB (66.00 cm). The recommended load limit (RWL) is 5.38 kg. Operation of the machine chopper section does not cause work fatigue with an average CVL of 10.71% (≤ 30%).

 

Keywords: Anthropometry, CVL,  Pulse Rate, RWL, Work Fatigue.

Downloads

Download data is not yet available.

References

Apriliandi, dkk. 2022. Uji Kinerja Mesin Pencacah Tipe Multiguna untuk Pencacah Tongkol Jagung. Jurnal Agricultural Biosystem Engineering.

Arfiyanto, M. 2012. Perancangan Mesin Pencacah Rumput Pakan Ternak. Universitas Negeri Yogyakarta.

Munier, F.F. 2017. Buku Teknis Budidaya: Mengenal Jenis Hijauan Pakan untuk ternak Ruminansia di Kalimantan Tengah. BPTP Kalimantan Tengah.

Hanafie, Fadhli, dan Syahruddin. 2016. Rancang Bangun Mesin Pencacah Rumput untuk Pakan Ternak. ILTEK. 11(1).

Hidayat, M., Harjono, Marsudi, dan Gunanto, A. 2006. Evaluasi Kinerja Teknis Mesin Pencacah Hijauan Pakan Ternak. Jurnal Enjiniring Pertanian IV(2): 61-64

Pijar, dkk 2022. Uji Kinerja Mesin Pencacah Tipe GX 160 untuk Pencacah Tongkol Jagung dan Ampas Tebu. Jurnal Agricultural Biosystem Engineering.

Prapti, N. K. G., Nurhesti, P. O. Y., dan Tirtayasa, K. 2017. Kajian Ergonmi pada Tindakan Ergonomi Keperawatan di Ird Rs Universitas Udayana, Bandung, Bali. Jurnal Keperawatan Respati Yogyakarta, 5 (3): 414-419.

Tarwaka, H. A., Bakri, S., and Sudiajeng, L., 2004. Ergonomic untuk Keselamatan, Kesehatan Kerja dan Produktivitas. UNIBA PRESS. Surakarta

Untari S. 2008. Pengantar Produksi Hijauan pakan Ternak. Semarang University Press. Semarang.

Waters, T. R.; Anderson, V. P.Garg, A. 1994. Application Manual For The Revised NIOSH Lifting Equation. US Department of Health and Human Service, Cincinnati

Downloads

Published

2023-09-29

How to Cite

Anggiana, A., Suharyatun, S., Wisnu, F. K., & Warji, W. (2023). Analisis Ergonomika Pengoperasian Bagian Pencacah pada Mesin Pencacah Pakan Ternak Multiguna. Jurnal Agricultural Biosystem Engineering, 2(3), 383–392. https://doi.org/10.23960/jabe.v2i3.8037

Issue

Vol. 2 No. 3 (2023): September 2023

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Jurnal Agricultural Biosystem Engineering

Creative Commons License
JABE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.