Pengaruh Jumlah Masukan dan Varietas Batang Singkong Terhadap Kinerja Mesin Rabakong Tipe TEP-6

Authors

  • Sandi Asmara Universitas Lampung
  • Sapto Kuncoro Universitas Lampung
  • Siti Suharyatun Universitas Lampung
  • Muhammad Alif Aditya Universitas Lampung

DOI:

https://doi.org/10.23960/jabe.v2i3.8055
Abstract View: 209

Abstract

A lot of cassava stem waste is not used and is only left to rot or burned, so the handling of cassava stems into animal feed ingredients is carried out. The purpose of this research is to determine the performance of the TEP-6 type cassava stem chopper in carrying out the shrinking process with the influence of the variety and the number of cassava stem inputs. This research was conducted with quantitative descriptive method, through testing, measurement, hypothesis through mathematical and statistical calculations, as well as in the presence of graphs and statistical analysis. The results of this research are the best capacity in the Kasesart type of input number of 4 stems with a value of 203,867 kg / hour, and the lowest weight loss is in the Kasesart number of input 3 stems with a value of 11,822%, the lowest fuel consumption is at 1,971 l/jam, there is no fatigue in the use of rabakong machines, and there is a high size of the insertion place that is not yet ergonomic.  And there is a certain size or distance in chopping so that it can effective and efficient.

 

Keywords: Cassava Trunk Waste, Chopper Performance, Number of Inputs, Shrinkage, Variety.

Downloads

Download data is not yet available.

References

Islami, T. 2015. Ubi Kayu; Tinjauan Aspek Ekofisiologi serta Upaya Peningkatan dan Keberlanjutan Hasil Tanaman. Graha Ilmu. Yogyakarta

Gustam, A.A. 2018. Rancang Bangun dan Uji Kinerja Alat Perajang Batang Singkong Tipe TEP 1. Skripsi. Universitas Lampung. Bandar Lampung

Fadli, I., Lanya, B., Tamrin. 2015. Pengujian Mesin Perajang Hijauan Pakan (Chopper) Tipe Vertikal Wonosari I. Jurnal Teknik Pertanian Lampung. 4(1): 35- 40

BPS [Badan Pusat Statistik] Kabupaten Lampung Tengah. 2017. Lampung Tengah Dalam Angka. Badan Pusat Statistik Kabupaten Lampung Tengah. Gunung Sugih.

Downloads

Published

2023-09-29

How to Cite

Asmara, S., Kuncoro, S., Suharyatun, S., & Aditya, M. A. (2023). Pengaruh Jumlah Masukan dan Varietas Batang Singkong Terhadap Kinerja Mesin Rabakong Tipe TEP-6. Jurnal Agricultural Biosystem Engineering, 2(3), 428–437. https://doi.org/10.23960/jabe.v2i3.8055

Issue

Vol. 2 No. 3 (2023): September 2023

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Jurnal Agricultural Biosystem Engineering

Creative Commons License
JABE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.