Pengaruh Pola Pengolahan Terhadap Efisiensi Pengolahan Tanah Menggunakan Traktor Tangan
DOI:
https://doi.org/10.23960/jabe.v2i3.8057
Abstract View: 2728
Abstract
It is important to choose a tillage pattern with the aim of efficiency and effectiveness. This research aims to analyze the effect of tillage patterns using hand tractors on processing work capacity, processing time efficiency and fuel requirements. The research was conducted at the BPTP Lampung Natar Experimental Garden located in Negara Ratu Village, Natar District, South Lampung Regency, Lampung Province. The research parameters observed consisted of: work capacity, processing time efficiency and fuel consumption. The research results show that the largest work capacity value is the edge pattern with an average of 0.044 ha/hour, compared to the circular continuous pattern with an average of 0.032 ha/hour and the middle pattern with an average of 0.029 ha/hour. The highest soil processing time efficiency was the circular continuous pattern at 49.86%, then the middle pattern 44.87% and the lowest was the circular continuous pattern 40.71%. The highest fuel consumption is the middle pattern at 0.55 liters/hour, then the edge pattern at 0.53 liters/hour and the circular continuous pattern at 0.45 liters/hour.
Keywords: Dry Land, Fuel Consumption, Lost Time, Work Capacity of Tillage.
Downloads
References
Ariesman, M. 2012. Mempelajari Pola Pengolahan Tanah pada Lahan Kering Menggunakan Traktor Tangan Bajak Rotasi. Universitas Hasanuddin. Makasar.
Arifin A. 2016. Kajian Kondisi Kebasahan Tanah Terhadap Unjuk Kerja Traktor Tangan Roda Dua Model Quik (Studi Kasus di Desa Kawo Kabupaten Lombok Tengah NTB). Universitas Mataram. Mataram.
BPS. 2023. Luas Panen dan Produksi Padi di Indonesia, 2022. BRS No. 21/03/Th. XXVI. Jakarta.
Dahono. 1997. Pengolahan Tanah Dengan Traktor Tangan, Bagian Proyek Pendidikan Kejuruan Teknik IV. Jakarta.
Gagelonia, E.C., Cordero, J.C., Dan Tadeo, B.D. 2005. Engineering TheCrop Establishment Sistem for Paddy Wet Seeding. Farm Machinery Industrial Research Corp. Agricultural Mechanization in AsiaAfricaAnd Latin America 2005 Vol.36 (2). Tokyo.
Rizaldi, T. 2006. Mesin Peralatan. Departemen Teknologi Pertanian Universitas Sumatera Utara. Medan.
Suastawa, I. N., Hermawan, W., Dan Sembiring, E.N. 2000. Konstruksi Dan Pengukuran Kinerja Traktor Pertanian. Teknik Pertanian. Fateta Ipb. Bogor.
Zulpayatun. 2014. Performansi Traktor Tangan Roda Dua Modifikasi Menjdi Roda Empat Multifungsi (Pengolahan dan Penyiangan) Untuk Kacang Tanah Kabupaten Lombok Barat. Skripsi. Universitas Mataram. Mataram
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Agricultural Biosystem Engineering
JABE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
