Pengaruh Suhu dan Dimensi Potongan pada Pembuatan Keripik Nanas Menggunakan Penggorengan Vakum (Vacuum Frying)

Authors

  • Sapto Kuncoro Universitas Lampung
  • Sandi Asmara Universitas Lampung
  • Kurnia Dharmawati Universitas Lampung
  • Tamrin Tamrin Universitas Lampung

DOI:

https://doi.org/10.23960/jabe.v3i1.8867
Abstract View: 444

Abstract

Pineapple is a fruit that is generally consumed fresh by Indonesian people. The potential for pineapple fruit in Indonesia is quite good, but its utilization and marketing have not been fully implemented. Apart from that, pineapples are easily damaged so proper post-harvest handling is needed to maintain their shelf life, one of which is processing them into chips. The technology that can be used in making chips is a vacuum frying machine to maintain the appearance of color, taste, aroma and crispness in the chips produced. The research aims to determine the effect of temperature and variations in the dimensions of fruit pieces on making pineapple chips using vacuum frying. The temperature used in this research consisted of three levels including temperatures of 75, 80, and 85 ℃ and three levels of cut dimensions including dimension 1 (circle), cut dimension 2 (half circle), and cut dimension 3 (quarter circle). After conducting research and data analysis, it was found that the effect of treatment interactions on the yield value and frying time was obtained. The cut dimension factor has a significant effect on the color and crispness of pineapple chips using vacuum frying.

 

Keywords: Cut Dimensions, Pineapple, Temperature, Vacuum Frying

Downloads

Download data is not yet available.

References

Badan Pusat Statistik Republik Indonesia, 2022. Produksi Tanaman Buah- Buahan 2022. Jakarta. Badan Pusat Statistik.

Isnaini R., Nasution, S., Mareta, DT., Permana, L., Talita, ZA., Saputri, A., dan Nurdin, SU. Nilai Mutu Keripik Buahn Hasil Penggorengan Vakum. Jurnal Standarisasil. 23 (3): 303 – 312.

Meilgaard, D. Sc. Morten. 1999. Sensory Evaluation Techniques. 3rd edition. New York: CRC Press.

Muchtadi, T.R. 2008. Teknologi Proses Pengolahan Pangan. 3 rd ed. Bogor : Institut Pertanian Bogor.

Nicolas Tumbel dan Supardi Manurung. 2017. Pengaruh Suhu dan Waktu Penggorengan Terhadap Mutu Keripik Nanas Menggunakan Penggorengan Vakum. Jurnal Penelitian Teknologi Industri. 09 (1) : 9-22.

Prabaningrum, S.D., Bintoro, V.P., dan Abduh, S.B.M. 2022. Pengaruh Konsentrasi Bahan Pengikat terhadap Nilai Rendemen, Kadar Air Aktivitas Air dan Warna pada Nori Artifisial Daun Cincau. Jurnal Aplikasi Teknologi Pangan. 11(2) 2022.

Sandranutha, S. 2012. Pengaruh Waktu dan Suhu Pada Pembuatan Keripik Bengkoang Dengan Vacuum Frying. Tugas Akhir. Universitas Diponegoro. Semarang.

Sriyono, 2012. Pembuatan Keripik Umbi Talas (Colocasia giganteum) Dengan Variabel Lama Waktu Penggorenga alat Vacuum Fryer. Tugas Akhir. Universitas Diponegoro. Semarang.

Sutriswanto, Candra, K.P., Murdianto, W., Emmawati. A. 2018. Pengaruh Bahan Baku Dalam Proses Penggorengan Vakum terhadap Mutu Sensorik Keripik Nanas (Ananas comosus (L) Merr). Jurnal Teknologi Pertanian.. 2018, 13(1):23-30. Samarinda.

Downloads

Published

2024-03-18

How to Cite

Kuncoro, S., Asmara, S., Dharmawati, K., & Tamrin, T. (2024). Pengaruh Suhu dan Dimensi Potongan pada Pembuatan Keripik Nanas Menggunakan Penggorengan Vakum (Vacuum Frying). Jurnal Agricultural Biosystem Engineering, 3(1), 61–69. https://doi.org/10.23960/jabe.v3i1.8867

Issue

Vol. 3 No. 1 (2024): March 2024

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Jurnal Agricultural Biosystem Engineering

Creative Commons License
JABE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.