Desain dan Evaluasi Kinerja Sistem Kendali Otomasi Air Kolam Pembibitan Lele (Clarias sp.)

Authors

  • Desrial Desrial Teknik Mesin dan Biosistem, Fakultas Teknologi Pertanian, IPB University
  • Delphi Yahya Yahya Abdul Kodir Teknik Mesin dan Biosistem, Fakultas Teknologi Pertanian, IPB University

DOI:

https://doi.org/10.23960/jabe.v3i2.9251
Abstract View: 233

Abstract

Catfish nurseries are required to be able to see the appropriate needs for catfish larvae, especially in pond water quality. However, in its application, generally adjustments to the needs of water quality are only carried out without any special treatment, so that the survival obtained is still low. The purpose of this research is to make a machine that can control the quality of catfish breeding water, test the performance of the machine and the effect of its use. This study used the method of formulating and evaluating the design and testing the performance of the machine which consisted of several stages, including: formulating and evaluating the design, manufacturing the machine, functional testing, performance testing, and the influence of the machine performance. The results obtained after testing were the performance of the machine affecting the speed of hatching eggs, the growth rate and survival of catfish larvae. The speed of hatching catfish eggs is 4 hours faster using a machine. The growth rate using a machine is 0.061g/head, while without using a machine it is 0.053g/head. The survival of fish larvae using machine was 80.3%, while without using machine was 63.1%.

 

Keywords: Control, Fish Larvae, Growth Survival, Water Quality.

Downloads

Download data is not yet available.

References

Aidil, D., Zulfahmi, I., & Muliari, M. (2016). Pengaruh suhu terhadap derajat penetasan telur dan perkembangan larva ikan lele sangkuriang (clarias gariepinus var. sangkuriang). JESBIO: Jurnal Edukasi dan Sains Biologi, 5(1).

Azizah, N. F. N., Pujiharsono, H., & Afandi, M. A. (2022). Sistem pengendalian suhu dan kadar pH pada kolam ikan lele berbasis IoT pada Desa Kutaringin Kabupaten Banjarnegara. Jurnal RisetSains dan Teknologi. 6(1): 65-70. doi:10.30595/jrst.v6i1.11693

Nasional, B. S. (2014). Ikan lele dumbo (Clarias sp.) Bagian 3: Produksi induk.

Hakiki, M. F., & Riandari, D. (2018). Rancang bangun sistem induction heater berbasis mikrokontroller atmega 328. Jurnal Rekayasa Mesin. 4(3): 83-89.

Imaduddin G., & Saprizal A. (2017). Otomatisasi monitoring danpengatur keasaman larutan dan suhu air kolam ikan pada pembenihan ikan lele. JUST IT: Jurnal Sistem Informasi, Teknologi Informasi dan Komputer. 7(2): 28-35.

Iswanto, B. (2013). Menelusuri identitas ikan lele. Media Akuakultur. 8(2): 85-95.

PH, U. R., Rebhung, F., & Tallo, I. (2018). Pengaruh Volume Pergantian Air Media Terhadap Kelulushidupan Larva Ikan Lele Sangkuriang (Clarias Gariepinus). Jurnal Aquatik, 1(1), 18-23.

Sinaga, A. A., Wijianti, E. S., & Saparin, S. (2019, September). Analisa variasi rangkaian alat pendingin sederhana menggunakan elemen peltier (termoelektrik) sebagai media pendingin darah. In Proceedings Of National Colloquium Research And Community Service (Vol. 3, pp. 166-170).

Suryadi, A., & Firmansyah, A. (2020). Rancang Bangun Kulkas Mini Portable Menggunakan Peltier. Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer, 11(1), 11-22.

Tukiman, P. S., & Satmoko, A. (2013). Perhitungan dan pemilihan pompa pada instalasi pengolahan air bebas mineral iradiator gamma kapasitas 200 Kci. Prosiding Pertemuan Ilmiah Perekayasaan Perangkat Nuklir, PRPN–BATAN, 14.

Widodo, T., Irawan, B., Prastowo, A. T., & Surahman, A. (2020). Sistem Sirkulasi Air Pada Teknik Budidaya Bioflok Menggunakan Mikrokontroler Arduino Uno R3. Jurnal Teknik Dan Sistem Komputer, 1(2), 34-39.

Yana, K. L., Dantes, K. R., & Wigraha, N. A. (2017). Rancang Bangun Mesin Pompa Air Dengan Sistem Recharging. Jurnal Pendidikan Teknik Mesin Undiksha, 5(2).

Downloads

Published

2024-06-30

How to Cite

Desrial, D., & Yahya Abdul Kodir, D. Y. (2024). Desain dan Evaluasi Kinerja Sistem Kendali Otomasi Air Kolam Pembibitan Lele (Clarias sp.). Jurnal Agricultural Biosystem Engineering, 3(2), 216–227. https://doi.org/10.23960/jabe.v3i2.9251

Issue

Vol. 3 No. 2 (2024): June 2024

Section

Articles

License

Authors who publish with this journal agree to the following terms:

Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).

Jurnal Agricultural Biosystem Engineering

Creative Commons License
JABE is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.