Study of Spray Fogging Performance Using a Combination of Fogging  Machine, Electric Sprayer, and Air Blower

Gatot Pramuhadi; Josua Natanael; Nenda Fuji Putri Daliesta

doi:10.23960/jtep-l.v14i3.866-878

Authors

Gatot Pramuhadi Department of Mechanical Engineering and Biosystem, IPB University, Bogor, INDONESIA Center for Research on Engineering Application in Tropical Agriculture (CREATA), IPB University, Bogor, INDONESIA http://orcid.org/0000-0001-5891-8525
Josua Natanael Department of Mechanical Engineering and Biosystem, IPB University, Bogor, INDONESIA
Nenda Fuji Putri Daliesta School of Life Sciences and Technology, Institut Teknologi Bandung, Bandung, INDONESIA

DOI:

https://doi.org/10.23960/jtep-l.v14i3.866-878

Abstract View: 159

Abstract

This study aims to determine and analyze the parameters of spray fogging performance for the application of pesticide fog. Air blower spraying performance can be increased by regulating the type of fan and type of air blower. Setting the type of fan in air blower is axial fan and centrifugal combined with cone of 4, 6, and 8 holes. The most optimum combination of the test treatment is the combination of axial fan air blower and 4-hole cone. Spray fogging can be increased by adjusting the combination spray angle between fogging machines and air blowers at various observation distances. The combination spray angle setting is angle of 15°, 30°, and 45° and the observation distance of 1 meter to 4 meters. The results of the analysis and determination of spray fogging performance parameters produce an angle of 45° as the most optimum spray angle from the observation distance of 1 meter to 4 meters. This is indicated by the average value of the droplet diameter of 78.74 μm, a 70 droplet/cm2 droplet density, an air flow speed of 1.97 m/s, and the temperature of the flocking of 31.8℃.

Keywords: Air blower, Droplets, Fogging, Nozzle, Spray.

Downloads

Download data is not yet available.

Author Biographies

Gatot Pramuhadi, Department of Mechanical Engineering and Biosystem, IPB University, Bogor, INDONESIA Center for Research on Engineering Application in Tropical Agriculture (CREATA), IPB University, Bogor, INDONESIA

I am a lecturer at Department of Mechanical and Biosystems Engineering, Faculty of Agricultural Engineering and Technology, IPB University, Bogor, West Java, Indonesia

I am also as a researcher at Center for Research on Engineering Application in Tropical Agriculture (CREATA), IPB University, Bogor, INDONESIA

Josua Natanael, Department of Mechanical Engineering and Biosystem, IPB University, Bogor, INDONESIA

I am a bachelor at Department of Mechanical and Biosystems Engineering, Faculty of Agricultural Engineering and Technology, IPB University, Bogor, West Java, Indonesia

Nenda Fuji Putri Daliesta, School of Life Sciences and Technology, Institut Teknologi Bandung, Bandung, INDONESIA

I am a post-graduate student at School of Life Sciences and Technology, Institut Teknologi Bandung, Bandung, INDONESIA

References

Ayu, Z.M. (2022). Kinerja sprayer elektrik dengan air blower menggunakan kipas sentrifugal pada berbagai pengaturan tipe nosel untuk pengendalian gulma lahan kering. [Undergraduate Thesis]. Bogor (ID): IPB University.

Blake, W.K. (2017). Mechanics of Flow- Induced Sound and Vibration. Academic Press, London, United Kingdom.

BSN (Badan Standardisasi Nasional). (2011). SNI 7640:2011 – Alat Pemeliharaan Tanaman – Sprayer Gendong Bermotor Syarat Mutu dan Metode Uji. Badan Standardisasi Nasional, Jakarta.

BSN (Badan Standardisasi Nasional). (2018a). SNI 8485:2018 – Alat Pemeliharaan Tanaman – Sprayer Gendong Elektrik – Syarat Mutu dan Metode Uji. Badan Standardisasi Nasional, Jakarta.

BSN (Badan Standardisasi Nasional). (2018b). SNI 8650:2018 – Alat Pemeliharaan Tanaman – Pengabut Gendong (Knapsack Mist Blower) Bermotor – Syarat Mutu dan Metode Uji. Badan Standardisasi Nasional, Jakarta.

Central Bureau of Statistics [BPS]. (2022). Palm Oil Production 2022. Jakarta (ID): Central Bureau of Statistics. Desi, D., Noviana, E., & Yudhi, Y. (2020). Pemodelan matematika penerjun payung pada posisi track sebelum parasut dibuka. BIMASTER: Buletin Ilmiah Matematika, Statistika dan Terapannya, 9(1), 181–188. https://doi.org/10.26418/bbimst.v9i1.38740

Dewangga, M., & Yamin, M. (2021). Rancang ulang desain impeller kipas sentrifugal sistem pendingin mesin sepeda motor skutik dengan metode reverse engineering. Jurnal Teknologi, 13(1), 67–73.

Fahri, R. (2022). Kinerja Alat Pengabutan Pestisida Pada Tanaman Kelapa Sawit. [Undergraduated Thesis]. IPB University. Juanda, H., Hasanuddin, H., & Syamsuddin, S. (2020). Effectiveness of invigoration of expired chili seeds (Capsicum annuum L.) using plant growth-promoting rhizobacteria. Scientific Journal of Agricultural Students, 5(2), 121–129.

Lubis, M.F., & Lubis, I. (2018). Analisis produksi kelapa sawit (Elaeis guineensis Jacq.) di Kebun Buatan, Kabupaten Pelalawan, Riau. Buletin Agrohorti, 6(2), 281–286. https://doi.org/10.29244/agrob.v6i2.18945

Lusmaniar, L., Oksilia, O., Novita, D., Kriswantoro, H., Syamsuddin, T., Missdiani, M., & Jali, S. (2022). Upaya pengendalian hama lalat buah pada tanaman labu madu di RT 04 Kelurahan Sukamulya Kecamatan Sematang Borang Kota Palembang. Jurnal Pengabdian Masyarakat Pamong, 1(2), 31–37. https://ejournal.unitaspalembang.com/index.php/jpm/article/view/110/47

Nurhasnita, F.N.U., Yaherwandi, F.N.U., & Efendi, S. (2020). Survei hama pada perkebunan kelapa sawit rakyat di Kecamatan Sembilan Koto Kabupaten Dharmasraya. Agriprima: Journal of Applied Agricultural Sciences, 4(1), 6–17. https://doi.org/10.25047/agriprima.v4i1.347

Pramuhadi, G., Ibrahim, M.N.R., Haryanto, H., & Johannes. (2019). Studi efektivitas herbiciding gulma lahan kering pada berbagai metode pengabutan. Jurnal Teknik Pertanian Lampung, 8(1), 1–9. https://doi.org/10.23960/jtep-l.v8i1.1-9

Rafidah, H. (2021). Kinerja Air Blower Untuk Pengendalian Gulma Pada Berbagai Pengaturan Jumlah Baling-Baling dan Tipe Nosel Air Blower. [Undergraduate Thesis]. IPB University.

Rizal, MS. (2018). Pengaruh Tata Letak dan Jumlah Nosel Terhadap Hasil Semburan Kabut Di Greenhouse Agrotechno Park Jubung Jember. [Undergraduate Thesis]. Universitas Jember.

Rica, ANW., Nohe, DA., Goejantoro, R. (2016). Penerapan statistika nonparametrik dengan metode brown-mood pada regresi linear berganda. Jurnal Eksponensial, 7(1), 1-8. https://jurnal.fmipa.unmul.ac.id/index.php/exponensial/article/view/12

Rukmana, F. (2018). Kinerja Liquid Fertilizing Berdasarkan Perbedaan Sumber Tekanan Pengabutan Pada Budidaya Kangkung Di Dalam Greenhouse. [Undergraduate Thesis]. IPB University.

Safitri, RH. (2020). Kinerja Sprayer Elektrik dan Air Blower Untuk Pemupukan Cairan Pada Budidaya Kangkung Berdasarkan Perbedaan Jenis Nosel. [Undergraduate Thesis]. IPB University.

Simanjuntak, FA. (2020). Pengendalian hama ulat api (Setora nitens) dengan menggunakan bahan aktif deltametrin dan ekstrak daun mimba. Jurnal Mahasiswa Agroteknologi (JMATEK), 1(1), 30-37.