PENGEMBANGAN ALAT TANAM JAGUNG TIPE TUGAL DALAM UNTUK LAHAN KRITIS

Makbul Hajad, Radi Radi, Bambang Purwantana

Abstract


Blora and Grobogan are regions with higher production capacity of corn commodity compared to other regions in Central Java province. However, low number of technical irrigation and el-nino phenomenon have become the main threat for the sustainability of corn farming in both regions. During dry session, the top soil of the land are solidified which lead to higher difficulty for planting the corn seed using traditional tool. An improved design of the traditional seeder is then required to solve this problem to enable farmers plant corn seed during dry session. The objective of this research was to develop seeder prototype with “Tugal Dalam” type in Blora and Grobogan regions where the land have been categorized as marginal land during dry session. The proposed design is based on technical, ergonomic, economical, and social aspect. The qualitative approach was used to obtain the technical, ergonomical, economical and social aspect required by the farmer. Kansei Engineering is used to translate and evaluate the proposed design through some tests conducted on several group of farmers where they were requested to use 4 seeder design options and write their preference on each design option based on the mentioned aspects. Tests confirmed that the proposed design can be used to plant a corn seed at farmers desired characteristics. Kansei engineering also confirmed that ‘high speed’, ‘easy to operate’, ‘low price’, ‘easy to handle’ and ‘has a watering system’ were preferred by the farmers and determined their decision on buying and using the seeder tool.

 

Keywords: kansei engineering,  marginal land, seeder development, tugal dalam


Full Text:

PDF

References


BPS. 2018. Jagung 2015-2018. Retrieved 27/1/2021, from Badan Pusat Statistik (BPS) Provinsi Jawa Tengah https://jateng.bps.go.id/indicator/53/725/1/jagung.html

FAO. 2001. Crop Water Management-Maize. Retrieved 27/1/2021, from Land and Water Development, FAO www.fao.org

Harimurti, E. F. 2018. Perencanaan Pengembangan Kawasan Budidaya Jagung Untuk Peningkatan Perekonomian Kabupaten Pemalang, Jawa Tengah. Institut Pertanian Bogor, Bogor.

He, X., Ding, Y., Zhang, D., Yang, L., Cui, T., & Zhong, X. 2019. Development of a variable-rate seeding control system for corn planters part II: Field performance. Computers and Electronics in Agriculture, 162:309-317. doi:https://doi.org/10.1016/j.compag.2019.04.010

He, X., Zaiman, W., Xiwen, L., Xiaoman, C., Chunbo, L., & Ying, Z. 2017. General Structure Design and Field Experiment of Pneumatic Rica Direct-Seeder. International Journal of Agriculture & Biological Engineering, 10(6): 31-42.

Jindo, T., & Hirasago, K. 1997. Application studies to car interior of Kansei engine. International Journal of Industrial Ergonomics, 19: 105-114. doi:https://doi.org/10.1016/S0169-8141(96)00007-8

Kosky, P., Wise, G., Balmer, R., & Keat, W. 2010. Exploring engineering : an introduction to engineering and design. London: Academic Press Elsivier.

Kusuma, D., Faiz, A. H., Purba, R. D. A., & Sabit, M. I. 2018. Perancangan Alat Tanam Benih Ergonomis dengan Pendekatan Antropometri. Paper presented at the Prosiding Industrial Engineering National Conference (IENACO), Sleman, Yogyakarta. http://hdl.handle.net/11617/9764

Luftansa, P., & Suryadi, A. (2020). Perancangan Alat Penanam Benih Jagung dengan Metode Design for Assembly (DFA). JUMINTEN: Jurnal Manajemen Industri & Teknologi,1(6):122-132. doi:https://doi.org/10.33005/juminten.v1i6.197

Ospina-Bayona, H. E., Sanches-Torres, C. C., Garcia-Leon, R. A., Ballesteros-Ruiz, H. A., & Perez-Lorenzo, B. C. 2019. Design of Mechanical Seeder. Journal of Physics: Conference Series, 1388: 1-7. doi:https://doi.org/10.1088/1742-6596/1388/1/012004

Ritung, S., Nugroho, K., Mulyani, A., & Suryani, E. 2011. Petunjuk Teknis Evaluasi Lahan Untuk Komoditas Pertanian (Edisi Revisi ed.). Bogor: Balai Besar Penelitian dan Pengembangan Sumberdaya Lahan Pertanian Badan Penelitian dan Pengembangan Pertanian, Kementerian Pertanian.

Sianipar, T. P. O., & Fatoni, Z. 2019. Perancangan Alat Penanam Benih Jagung dan Penyiraman. Turbulen: Jurnal Teknik Mesin, 2(1): 25-32.

Smith, H. P. 1990. Mesin dan Peralatan Usaha Tani. Yogyakarta: Gadjah Mada University Press.

Sunanto. 2013. Kajian Sebaran Lahan Pertanian Tanaman Pangan Berkelanjutan Di Kabupaten Grobogan. Journal of Rural and Development, IV(1): 43-59.

Syafa'at, I., & Subantoro. 2017. Perancangan Alat Penanam Benih Jagung Multifungsi Bagi Masyarakat Singorojo, Kendal. Abdimas Unwahas, 2(2): 40-44. doi:http://dx.doi.org/10.31942/abd.v2i2.2104

Yusianto, R. 2012. Rancang Bangun Alat Tanam Benih Jagung Ergonomis Dengan Tuas Pengungkit. Paper presented at the Seminar Nasional Teknologi Informasi & Komunikasi Terapan, Semarang.




DOI: http://dx.doi.org/10.23960/jtep-l.v10i2.129-138

Refbacks

  • There are currently no refbacks.




Copyright (c) 2021 Radi Radi

Web
Analytics JTEP Stats

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.