Quality Control Analysis of Reject Products in the Multiline Machine Packaging Process Using the Statistical Quality Control (SQC) Method
DOI:
https://doi.org/10.23960/jtep-l.v14i2.448-457
Abstract View: 238
Abstract
Food packaging is used to wrap products in order to protect them from external contamination, including ensuring food safety. Multiline machine is commonly used as the form of packaging. The problem is, the product that is rejected is often surpass the standard limits that has been set by the company. This study aims to identify the types of rejects that often occur, identify rejects that are still within the control limits or not and what factors cause reject products. Statistical Quality Control (SQC) method with seven control tools is used within this research. The study concludes there were 6 types of rejects produced by the multiline machine. 3 of the highest rejects types on the pareto diagram of the multiline machine, namely leaking as many as 5,550 sachets for percentage of 28.16%, reject cutter as many as 4,760 sachets for percentage of 24.21% and packaging precision as many as 4,180 sachets for percentage of 21.21% with a cumulative percentage of 73.52%. After being revised, the results of the reject control chart analysis are still within the control limits, but still with high amounts of rejects. Materials, machines, people, and methods are the factors that affect products to be rejected.
Keywords: Control chart, Multiline machines, Packaging, Reject Statistical Quality Control (SQC)
Downloads
References
Akbar, M., Wahyudin., & Khoirulloh, A. (2023). Analisis tingkat kecacatan kemasan produk dengan menggunakan metode seven tools di PT. ABC. Journal of Industrial Engineering and Operation Management (JIEOM), 6(1), 18-26. http://dx.doi.org/10.31602/jieom.v6i1.9593
Alifka, K.P., & Apriliani, F. (2024). Analisis pengendalian kualitas produk menggunakan metode statistical process control (SPC) dan failure mode and effect analysis (FMEA). Factory Jurnal Industri, Manajemen dan Rekayasa Sistem Industri, 2(3), 97–118. https://doi.org/10.56211/factory.v2i3.486
Alhumairoh, F.N. (2021). Analisis Produk Reject Terhadap Pengendalian Kualitas Menggunakan Metode Statistical Process Control Di PT. X. [Undergraduated Thesis], Politeknik Negeri Jakarta.
Arianti, M.S., Rahmawati, E., & Prihatiningrum, R.R.Y. (2020). Analisis pengendalian kualitas produk dengan menggunakan statistical quality control (SQC) pada usaha Amplang Karya Bahari di Samarinda. Jurnal Bisnis dan Pembangunan, 9(2), 1-13.
Aristriyana, E., & Fauzi, R.A. (2022). Analisis penyebab kecacatan produk dengan metode fishbone diagram dan failure mode effect analysis (FMEA) pada Perusahaan Elang Mas Sindang Kasih Ciamis. Jurnal Industrial Galuh, 4(2), 75–85. https://doi.org/10.25157/jig.v4i2.3021
Asma, K. (2023). Analisis statistical quality control (SQC) pada produksi roti di Mahkota Bakery. [Undergraduated Thesis]. Program Studi Teknik Industri, Institut Teknologi Nasional Malang.
Carmelita, F. (2022). Analisis pengendalian kualitas pada produk spatula alumunium di Pekanbaru. [Undergraduated Thesis]. Program Studi Manajemen, Fakultas Ekonomi dan Bisnis, Universitas Islam Riau.
Firdaus, A.R. (2023). Analisis pengendalian kualitas produk cuka apel dengan metode P-Chart di PT. Tirta Sarana Sukses. [Intership Report]. Program Studi Teknologi Rekayasa Pangan, Jurusan Teknologi Pertanian, Politeknik Negeri Jember.
Ginting, M.I.D. (2023). Penerapan Metode Six Sigma dan Failure Mode And Effect Analysis (FMEA) dalam Meminimasi Terjadinya Defect Pada Proses Produksi (Studi Kasus Di PT . Sandang Asia Maju Abadi ). [Undergraduate Thesis]. Faculty of Industrial Technology, Universitas Islam Indonesia, Yogyakarta: 62 p.
Gunawan, C.V., & Tannady, H. (2016). Analisis kinerja proses dan identifikasi cacat dominan pada pembuatan bag dengan metode statistical proses control (Studi kasus : Pabrik alat kesehatan PT.XYZ, Serang, Banten). Jurnal Teknik Industri, 11(1). https://doi.org/10.12777/jati.11.1.9-14
Hairiyah, N., Amalia, R.R., & Luliyanti, E. (2019). Analisis statistical quality control (SQC) pada produksi roti di Aremania Bakery. Industria: Jurnal Teknologi dan Manajemen Agroindustri, 8(1), 41–48 https://doi.org/10.21776/ub.industria.2019.008.01.5
Haryanto, I.I.S. (2019). Penerapan metode SQC (statistical quality control) untuk mengetahui kecacatan produk shuttlecock pada UD. Ardiel Shuttlecock. Jurnal Valtech, 2(2), 186-191.
Nazia, S., Fuad, M., & Safrizal. (2023). Analisis statistical quality control (SQC) dalam pengendalian kualitas produk pada usaha batu bata di Kota Langsa. Jurnal Minfo Polgan, 12(1). https://doi.org/10.33395/jmp.v12i1.12790
Putra, I.D.G.R, & Sumiati, S. (2023). Analisis tingkat kecacatan produk dengan seven tools dan failure mode effect analysis di PT. Selatan Jadi Jaya. Jurnal Penelitian Rumpun Ilmu Teknik, 3(1), 198–209. https://doi.org/10.55606/juprit.v3i1.3236
Putra, G.D., Pangestu, P.A., & Puspitasari, I. (2022). Analisis pengendalian kualitas produk dengan menggunakan analisis P-Chart untuk mengetahui penyebab produk rusak di PT. Krakatau Steel. Bulletin of Applied Industrial Engineering Theory, 3(1), 7–10.
Rachmawati, A. (2023). Penerapan metode six sigma dan FMEA sebagai upaya minimasi defect proses pengemasan di PT. Marimas Putera Kencana. [Undergraduated Thesis]. Program Studi Teknologi Rekayasa Pangan, Jurusan Teknologi Pertanian, Politeknik Negeri Jember.
Ramadhani, D.D., & Liquiddanu, E. (2022). Perbaikan kualitas produk KKBW 480 menggunakan metode six sigma di PT. INKA (Persero). Jurnal Seminar dan Konferensi Nasional IDEC, 23 Juli 2022: D10.1- D10.10.
Ramadhany, F.F., & Supriono, S. (2017). Analisis penerapan sistem manajemen mutu ISO 9001:2015 dalam menunjang pemasaran (Studi pada PT Tritama Bina Karya Malang). Jurnal Administrasi Bisnis (JAB), 53(1), 31–38.
Saefullah, A., Fadli, A., Nuryahati, N., Agustina, I., & Abas, F. (2023). Implementasi prinsip Pareto dan penentuan biaya Usaha Seblak Naha Rindu. Jurnal Media Wahana Ekonomika, 20(1), 1–13. https://doi.org/10.31851/jmwe.v20i1.11077
Subhan, A. (2022). Penerapan Metode Seven Tools of Quality Control dalam Mengurangi Irregularity Cargo pada Pos Operasional Cargo Export PT. Gapura Angkasa Cabang Denpasar. [Undergraduated Thesis]. Jurusan Administrasi Niaga, Politeknik Negeri Bali.
Wahyuati, A. (2016). Pentingnya standar di dalam dunia usaha. EKUITAS (Jurnal Ekonomi dan Keuangan), 1(1), 38-44.
Zecky, V.M., & Riandadari, D. (2018). Penerapan setode Statistical Quality Control (SQC) dalam meminimalisir cacat produk paving block K300 – T6 di PT. Ase Gresik. Jurnal Pendidikan Teknik Mesin, 06(3), 86–92.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Lice that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Jurnal Teknik Pertanian Lampung
JTEPL is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
