PERFORMANCE ANALYSIS OF WORKING FLUIDS ON ORGANIC RANKIE CYCLE (ORC) MODEL WITH BIOMASS ENERGY AS A HEAT SOURCES

Authors

  • Lilis Sucahyo IPB University (Institut Pertanian Bogor)
  • Muhamad Yulianto
  • Edy Hartulistiyoso
  • Irham Faza

DOI:

https://doi.org/10.23960/jtep-l.v8i3.175-186
Abstract View: 761

Abstract

Organic Rankine Cycle (ORC) is an electricity power technology particularly suitable for medium-low temperature heat sources and/or for small available termal power. This paper presents the simulation and performance analysis of working fluids R-134a, R-414B, R-404A and R-407C on ORC with biomass energy as a heat source. Simulation of the ORC system using Cycle Tempo software. The property of working fluids is obtained by using Reference Fluid Properties (Refprop). The best result performance of ORC was shown by working fluid R-404A with thermal efficiency 7.54 % and electric power output ranges between 0.075 kW. This condition operated on turbine inlet temperature at 60 oC, difference turbine working temperature of 15 oC, condensing temperature 25 oC and water boiler mass flow rate 3 lpm.

Downloads

Download data is not yet available.

Author Biography

Lilis Sucahyo, IPB University (Institut Pertanian Bogor)

Departmen of Mechanical and Biosystem Engineering (Departemen Teknik Mesin dan Biosistem)

Downloads

Published

2019-09-30

How to Cite

Sucahyo, L., Yulianto, M., Hartulistiyoso, E., & Faza, I. (2019). PERFORMANCE ANALYSIS OF WORKING FLUIDS ON ORGANIC RANKIE CYCLE (ORC) MODEL WITH BIOMASS ENERGY AS A HEAT SOURCES. Jurnal Teknik Pertanian Lampung (Journal of Agricultural Engineering), 8(3), 175–186. https://doi.org/10.23960/jtep-l.v8i3.175-186

Issue

Section

Articles