PROSES PEMBUATAN PULP BERBASIS AMPAS TEBU: BATANG PISANG DENGAN METODE ACETOSOLVE

Authors

  • Zulferiyenni Zulferiyenni Staf Pengajar Jurusan Teknologi Industri Pertanian Fakultas Pertanian Universitas Lampung
  • Otik Nawansih Staf Pengajar Jurusan Teknologi Industri Pertanian Fakultas Pertanian Universitas Lampung
  • Sri Hidayati Staf Pengajar Jurusan Teknologi Industri Pertanian Fakultas Pertanian Universitas Lampung

DOI:

https://doi.org/10.23960/jtihp.v14i1.90%20-%2096
Abstract View: 1482

Abstract

In Indonesia, pulp and paper production generally uses wood.  Intensive forest explotation causes deforesting, global warming,and lessen the wood deposit and forest area.  Therefore, government should seek alternative raw material such as bagasse for pulp and paper production, with naturally friendly environment pulping method, such as acetosolve method. In this research bagasse and banana fiber were used as raw material for pulp production.  Then, raw material analyses was conducted for chemical content which were cellulose, hemicellulose, lignin, and ash, and  pulp physical properties.  The best result in pulping process was 70:30 ratio of bagasse and banana fiber with 80% acetate acid concentration which resulted 56% of cellulose, 27,4% of hemicellulose, 16,2% of lignin, 66% rendemen, 16.1 GE of brightness index,  0,83 (kPa.m/g) of  break index, 2,05 Nm2/Kg Of tear index,  19 Nm/g of tensil strength, and 93% of paper opacity.

Keywords: Bagasse, banana trunk fiber, acetosolve

Downloads

Download data is not yet available.

Downloads

Published

2012-12-20

How to Cite

Zulferiyenni, Z., Nawansih, O., & Hidayati, S. (2012). PROSES PEMBUATAN PULP BERBASIS AMPAS TEBU: BATANG PISANG DENGAN METODE ACETOSOLVE. Jurnal Teknologi &Amp; Industri Hasil Pertanian, 14(1), 90–96. https://doi.org/10.23960/jtihp.v14i1.90 - 96

Issue

Vol. 14 No. 1 (2009): Jurnal Teknologi & Industri Hasil Pertanian

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work

Creative Commons License
Jurnal Teknologi & Industri Hasil Pertanian is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.