Pengaruh lama pengeringan ampas tahu menggunakan oven dryer terhadap mutu tempe ampas tahu [The effect of drying time of tofu dregs using an oven dryer on the quality of its tempeh]
DOI:
https://doi.org/10.23960/jtihp.v28i2.120-128
Abstract View: 1293
Keywords:
tofu dregs, drying time, quality, tempeh, gembusAbstract
Tofu dregs tempeh is tempeh made from by-products of tofu processing. Tofu dregs tempeh contains high water content to exceed the SNI standard. The objective of this research was to determine the effect and the best result of drying time using an oven dryer at 60oC on the quality of tofu dregs tempeh. The method used in this research was a Completely Randomized Design (CRD) with seven treatments drying times 0, 15, 30, 45, 60, 7, and 90 minutes at 60oC. Significant difference data were tested for parameters of chemical quality (water content and water activity), and microbial quality (total microbial, mold mass, and mycelium area). A drying time of 60 minutes is recommended as the best treatment to produce tofu dregs tempeh with the following characteristic of 61.77% water content which has met the requirement of SNI No. 3144:2015; 0.82 water activity (Aw); 5.89 log CFU/g total microbial; 1.72% mold mass and; 30.66% mycelium area.
Downloads
References
Alvina, A., & Hamdani, D. (2019). Proses pembuatan tempe tradisional. Jurnal Pangan Halal, 1(1), 9–12. https://doi.org/10.30997/jiph.v1i1.2004
Amelianawati, M., Listyaningrum, R. S., & Faturochman, H. Y. (2019). Kajian potensi tempe gembus sebagai bahan penyedap rasa alami. Journal of Science, Technology and Entrepreneurship, 1(2), 162–166.
Amittari, 2023. Water activity meter WA 160 A. https://www.amittari.com/en/pd.jsp?id=299
Bintari, S. H., Purnama, D. F. E., Saputro, D. D., Sunyoto, S., Dewi, P., & Mubarok, I. (2022). Microbiological and biochemical tests on tempe production using tempe mold innovation. Journal of Biology & Biology Education, 14(2), 245–253. https://doi.org/10.15294/biosaintifika.v14i2.37700
BSN. (2009). SNI 01-7388-2009: Batas Maksimum Cemaran Mikroba dalam Pangan. Badan Standardisasi Nasional.
BSN. (2015). SNI 01-3144-2015: Standar Mutu Tempe Kedelai. Badan Standardisasi Nasional.
Burhanuddin, Y., Nugraha, S. A., Maulana, M. I., Harun, S., & Suudi, A. (2019). The design of a roasted coffee sorter system in order to control the quality of roasted coffee automatically based on the analysis of the thermographic image and color of roasted coffee. Proceeding of SNTTM XVII (pp. 1-6). Fakultas Teknik Universitas Lampung, Lampung.
Damanik, R. N. S., Pratiwi, D. Y. W., Widyastuti, N., Rustanti, N., Anjani, G., & Afifah, D. N. (2018). Nutritional composition changes during tempeh gembus processing. IOP Conference Series: Earth and Environmental Science, 116(1), 1–10. https://doi.org/10.1088/1755-1315/116/1/012026
Feriyanto, Y.E. (2014). Macam-macam alat pengering (Dryer), Best practice experience in power plant. www.caesarvery.com. Surabaya
Harrigan, W. F. (1998). Laboratory Methods in Food Microbiology. Academic Press.
Isnawati, M., Wijaningsih, W., & Tursilowati, S. (2021). Tempe Gembus: Pengolahan dan Potensi Gizi. PT. Nasya Expanding Management.
Kurniati, T. (2020). Detoksifikasi Zat Antinutrisi Forbol Ester dan Nilai Gizi Jatropha Curcas L. melalui Fermentasi oleh Kapang Rhizopus oryzae dan Aspergillus niger Serta Konsorsiumnya. Cendekia Press.
Kurniawan, C., Waluyo, T. B., & Sebayang, P. (2011). Analisis ukuran partikel menggunakan free-software image-J. Seminar Nasional Fisika (pp.1-8). Pusat Penelitian Fisika-LIPI.
Manurung, G., T. A. Sumbogo, & R. A. Lensun. (2014). Pelatihan Usaha Tempe Tahu. Amerta Publishing.
Mulia, D. S., Yulyanti, E., Maryanto, H., & Purbomartono, C. (2015). Peningkatan kualitas ampas tahu sebagai bahan baku pakan ikan dengan fermentasi Rhizopus oligosporus. Sainteks, 12(1), 10–20. https://doi.org/10.30595/sainteks.v12i1.83
Murdiati, A., Sardjono, & Amaliah. (2020). Perubahan komposisi kimia tempe gembus yang dibuat dari bahan dasar ampas tahu ditambah bekatul. Agritech, 20(2), 106–110. https://doi.org/10.22146/agritech.13698
Pamungkas, E. T. G. D. (2018). Perubahan mikrobiologis, fisik dan kimia selama fermentasi tempe kacang khas malang. Skripsi. Institut Pertanian Bogor, Bogor.
Rif’an, Nurrahman, & Aminah, S. (2017). Pengaruh jenis alat pengering terhadap karakteristik fisik, kimia dan organoleptik sup labu kuning instan. Jurnal Pangan dan Gizi, 7(2), 104–116. https://doi.org/10.26714/jpg.7.2.2017.104-116
Rizal, S., Kustyawati, M. E., & Amin, M. (2023). The influence of inoculum types on the chemical characteristics and β -glucan content of tempe gembus. Biodiversitas, 24(2), 793–798. https://doi.org/10.13057/biodiv/d240215
Rizal, S., Kustyawati, M. E., Murhadi, Hasanudin, U., & Subeki. (2022). The effect of inoculum types on microbial growth, β-glucan formation and antioxidant activity during tempe fermentation. AIMS Agriculture and Food, 7(2), 370–386. https://doi.org/10.3934/agrfood.2022024
Sari, A. M., AB, S., Yulianti, N. O., & Permana, Y. Y. (2018). Pengaruh waktu dan suhu pengeringan ampas tahu terhadap yield tepung ampas tahu. Seminar Nasional Sains dan Teknologi (pp.1–5). Fakultas Teknik Universitas Muhammadiyah, Jakarta.
Sarti, M. Y., Ridhowati, S., Lestari, S. D., Rinto, & Wulandari. (2019). Studi kesukaan panelis terhadap tempe dari biji lotus (Nelumbo nucifera) dan kedelai (Glycine max). Jurnal Fishtech, 8(2), 34–41. https://doi.org/10.36706/fishtech.v8i2.9665
Sudarmadji, S., Haryono, B., & Suhardi. (2007). Prosedur Analisis untuk Bahan Makanan dan Pertanian. Liberty Yogyakarta.
Sugiyono (2015). Metode Penelitian Kuantitatif, Kualitatif, dan R&D. Alfabeta.
Supiati (2019). Pengaruh konsentrasi ragi raprima terhadap mutu tempe ampas tahu. Skripsi. Universitas Mataram, Mataram.
Syahadi, A., Suhartatik, N., & Widanti, Y. A. (2022). Karakteristik fisikokimia tempe ampas tahu-kacang merah Phaseolus vulgaris L.). JITIPARI, 7(2), 125–130. https://doi.org/10.33061/ jitipari.v7i2.7148
Syawaluddin, S., Basri, H., Diniardi, E., Al-Haramain, M., & Ramadhan, A. I. (2017). Analisa desain mesin pengering ampas tahu dengan memanfaatkan panas gas buang dari boiler. DINAMIKA–Jurnal Ilmiah Teknik Mesin, 8(2), 47–54. https://doi.org/10.33772/djitm.v8i2.2445
Winanti, R., Bintari, S. H., & Mustikaningtyas, D. (2014). Studi observasi higienitas produk tempe berdasarkan perbedaaan metode inokulasi. Unnes Journal of Life Science, 3(1), 39–46.
Yuniarti, D., Solikhin, A., & Fera, M. (2020). Uji organoleptik tepung ampas tahu dengan variasi lama pengeringan. Jurnal Ilmiah Gizi Dan Kesehatan (JIGK), 2(1), 11–18. https://doi.org/10.46772/jigk.v2i01.254
Yuniarto, K., & Lastriyanto, A. (2019). Teknik Pengolahan Hasil Pertanian. Plantaxia.
Zambrano, M. V., Dutta, B., Mercer, D. G., Maclean, H. L., & Touchie, M. F. (2019). Assessment of moisture content measurement methods of dried food products in small-scale operations in developing countries: a review. Trends in Food Science & Technology, 88(4), 484–496. https://doi.org/10.1016/j.tifs.2019.04.006
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work
Jurnal Teknologi & Industri Hasil Pertanian is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
